355nm UV DPSS Laser435nm Blue DPSS Laser488nm Blue DPSS Laser491nm Blue DPSS Laser500.8nm Cyan DPSS Laser515nm Green DPSS Laser656.5nm Red Solid State Laser, T3656.5nm Red Solid State Laser, T7722nm Red Solid State Laser1030nm IR DPSS Laser1084nm IR DPSS Laser1112nm IR DPSS Laser1122nm IR DPSS Laser1444nm IR DPSS Laser442nm Blue Diode Laser685nm Red Diode Laser690nm Red Diode Laser705nm Red Diode Laser730nm Red Diode Laser845nm Infrared Diode Laser885nm Infrared Diode Laser965nm Infrared Diode Laser1450nm Infrared Diode Laser1470nm Infrared Diode Laser1550nm Infrared Diode Laser1560nm Infrared Diode Laser1530nm Fiber Coupled Laser1700nm Fiber Coupled Laser1900nm Fiber Coupled Laser1940nm Fiber Coupled Laser |
556nm Yellow-Green DPSS Laser (S8) |
|
|
Key Feature
|
Application
|
|
| YL556S8 Series Laser | |||
| Optical Parameter | |||
| Output Wavelength | 556±1nm | ||
| Output Power | 1~500mW | ||
| Spectral Linewidth | <0.0001nm | ||
| Spatial Mode | TEM00 | ||
| Longitudinal Mode | Single | ||
| Operating Mode | CW | ||
| Mode Quality (M2) | <1.2 | ||
| Beam Divergence, Full Angle | 1.5mrad | ||
| Beam Diameter (1/e2) @ Exit | 2.0mm | ||
| Power Stability | 3% (rms, over 2 hours, T= 25℃) [1] | ||
| Beam Pointing Stability | <50μrad over 2 hours (ambient ±5℃ ) | ||
| Polarization, Linear | 100:1 | ||
| Amplitude Noise | <0.5% (rms, 20Hz to 20MHz) | ||
| Coherent Length | >50m | ||
| Electrical Parameter | |||
| Power Supply | ADR-800D | ||
| Desktop PSU | |||
| Input Voltage | 85~240VAC, 50/60Hz | ||
| Modulation | None | ||
| Mechanical Parameter | |||
| Dimensions of Laser Head | 197 × 70 × 50mm | ||
| Weight of Laser Head | 2.0Kg | ||
| Dimensions of Power Supply | 238 × 146 × 102mm | ||
| Weight of Power Supply | 2.3Kg | ||
| Reliability | |||
| Warm Up Time | <10 minutes | ||
| Cooling | Forced-air cooled [2] | ||
| Operating Temperature, Case | 10℃ ~ 35℃ | ||
| Storage Temperature | -20℃ ~ 60℃ | ||
| Expected Operation Lifetime | 10000 hours | ||
| Warranty | 12 months | ||
| Note | |||
| [1] Better power stability (<1% rms, over 2hours, 25℃) is available upon request. [2] The laser head needs to be used on a heat sink with good heat dissipation. |
|||
| Laser Products | ||||
| Model | Output Power | Longitudinal Mode | Power Stability (2hrs, 25℃) | IEC/CDRH Laser Class |
| YL556S8-050 | 50mW | Single | 3% rms | Class 3B/IIIb |
| YL556S8-100 | 100mW | Single | 3% rms | Class 3B/IIIb |
| YL556S8-150 | 150mW | Single | 3% rms | Class 3B/IIIb |
| YL556S8-200 | 200mW | Single | 3% rms | Class 3B/IIIb |
| YL556S8-300 | 300mW | Single | 3% rms | Class 3B/IIIb |
| YL556S8-500 | <500mW | Single | 3% rms | Class 3B/IIIb |
| Mechanical Drawing (Laser Head) | |
 |
|
| Mechanical Drawing (Power Supply ADR-800D) | |
 |
 |